Skip

Calendar List
Sort by
Days

Dr.-Ing. Dipl.-Phys. Udo Gommel

Head of department Ultraclean Technology and Micromanufacturing

Udo Gommel, head of the department »Ultraclean Technology and Micromanufacturing«, has been working since 1996 at Fraunhofer IPA with his focus on equipment design, clean room suitable materials, production planning, collaboration and administration in diverse technical guidelines (VDI, DIN, CEN and ISO).


Professional Career

• 2016: President of Technical Committee Cleanroom Technology at Verein Deutscher Ingenieure e.V.

• 2012: Head of Business Unit Electronics and Microsystems

• 2008: Head of Department »Ultraclean Technology and Micromanufacturing«

• 2006: awarded a doctorate for research into assessment procedures for clean manufacturing materials

• 2004: head of cleanroom test centre and group manager for contamination control & clean production technologies

• 1996: scientist at Fraunhofer Institute Manufacturing Engineering and Automation, Department Ultraclean Technology and Micromanufacturing

• 1996: degree in physics


Relevant Experience

• cleanroom design and conception, planning

• special cleanroom suitable equipment and materials

• factory and layout planning for cleanliness controlled production


Board and Committee Activities

• ECSS-Q-ST-70-54 »Space Product Assurance – Ultra Cleaning of Flight Hardware«, chairman

• ISO/TC 209/WG 4 »Cleanroom Design and Construction«, committee member

• ISO/TC 209/WG 8 »Airborne Molecular Contamination«, German representative

• ISO/TC 209/WG 9 »Classification of surface particle cleanliness«, German representative

• ISO/TC 209/WG 10 »Classification of air cleanliness by nanoscale particle concentration«, committee member

• ISO/TC 209/WG 11 »Assessment of suitability for use of equipment by airborne particle concentration«, and »Assessment of suitability for use of equipment and material by airborne chem. concentration«, German representative

• ISO/TC 209/WG 12 »Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classification«, German representative

• VDI The Association of German Engineers, President of Technical Committee Cleanroom Technology

• VDI 2083/1.1 »Air cleanliness in regard of airborne nanoscale particle contamination (ACnP)«, chairman

• VDI 2083/9.1 »Compatibility with required cleanliness and surface cleanliness«, chairman

• VDI 2083/9.2 »Cleanroom Suitability of Consumables«, deputy chairman

• VDI 2083/14 »Airborne molecular contamination in cleanrooms«, member

• VDI 2083/15 »Personnel at the clean work place«, member

• VDI 2083/16 »Barrier systems – Isolators, mini-environments, separative devices«, deputy chairman

• VDI 2083/17 »Cleanroom technology – Compatibility of materials with the required cleanliness«, chairman


Department Activities

• specific responsibilities as head of department include the key subjects microsystems technology, microelectronics, cleanroom manufacturing and photovoltaics


General professional experience

• cleanroom design and conception, planning

• special cleanroom suitable equipment and materials


Specific professional experience (Excerpt):

• Project 1: Precision Cleaning Cleanroom for ESA ExoMars project Location/Partner: ESTEC, European Space Agency, Noordwijk, The Netherlands Realization Time and Period: 3 months (Oct’ 2009 to Dec’ 2009) and 2.5 months (Apr’ 2011 to June 2011) Budget: 1.8 Million EUR Special Project Expertise: Udo Gommel designed within this project a very special cleanroom for space applications, considering special requirements for ultra-precision cleaning tasks of the ExoMars project. He performed the following cleanroom designing tasks for this project:

o design and layout of cleanroom footprint, also considering all relevant constraints for material and personal flow concept, equipment and media to be installed

o design and selection of cleanroom suitable floors, ceilings and walls

o design of the cleanroom raised floor system for the precision cleaning cleanroom area

o design of the cleanroom personnel air shower

o construction materials for integrating the clean air components into the existing cleanroom

o layout, concept of and design of cleanroom equipment, personnel and material flow

o concept and design of personnel clothing concept/rules of conduct

o certification according to ISO 14644 standards


• Project 2: Dedicated R&D Cleanroom for the TOP LED technology solutions regarding future solid state lighting devices LED manufacturing cleanroom Location/Partner: Microelectronica S.A., Bucharest, Romania Realization Time and Period: 9 months (September 2011 to May 2012) Budget: 3.8 Million EUR Special Project Expertise: Udo Gommel designed within this project the cleanroom for a LED manufacturing and research cleanroom at Micreoelectronica S.A. (according to ISO 14644-1). Her performed following cleanroom design tasks within this specific topic:

o design of the cleanroom footprint and cleanroom equipment plan

o layout, concept and design of cleanroom personnel and material flow (considering ISO 14644-5, VDI 2083-5 and VDA part 19.2 restrictions and suggestions)

o design and selection of cleanroom suitable floors, ceilings and walls

o design of the cleanroom personnel air shower

o design of the cleanroom clothing procedures


• Project 3: Cleanroom for the cleaning of Space Flight Hardware Location/Partner: Thales Alenia Space Italia S.p.A., Torino, Italy Realization Time and Period: 4 months (December 2014 to March 2015) Budget: 0.9 Million EUR Special Project Expertise: Udo Gommel performed the design of the cleanroom at Thales Alenia Space for the ultraprecision cleaning cleanroom of flight hardware and realized within this project ultra-flexible cleanroom concept. His work within the project included the following tasks:

o design and layout of cleanroom footprint, also considering all relevant constraints for material and personal flow concept, equipment and media to be installed

o design and selection of cleanroom suitable floors, ceilings and walls

o design of the cleanroom raised floor system for the precision cleaning cleanroom area

o design of the cleanroom personnel air shower

o construction materials for integrating the clean air components into the existing cleanroom

o design of the cleanroom clothing procedures and cleanroom rules of conduct

Cleanzone 2020 - Program GER
2:00 — 3:10 PM
November 19 '20

Expert Talk: Contamination Control and Automation

How to secure and optimise cleanliness in your manufacturing process

Subject to changes without notice

Messe Frankfurt uses cookies to provide you the best possible browsing experience. By using our services, you consent to our use of cookies. More information

To get to your watchlist,

To register for this event, please log in.